Can Alvea use scans from the Dentsply Sirona Orthophos XG 3D Ready?

Yes. The Dentsply Sirona Orthophos XG 3D Ready exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.

Is the Dentsply Sirona Orthophos XG 3D Ready discontinued, and what replaced it?

The Dentsply Sirona Orthophos XG 3D Ready is no longer sold new; its successor is the Orthophos S 3D / SL 3D. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.

How much does a Dentsply Sirona Orthophos XG 3D Ready cost?

A comparable Dentsply Sirona Orthophos XG 3D Ready runs roughly ~$20k-35k used 2D (unverified). Before replacing, weigh whether a networking or software path gets you most of the capability for a fraction of that.

How much does it cost to repair a Dentsply Sirona Orthophos XG 3D Ready?

The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.

What is the field of view on the Dentsply Sirona Orthophos XG 3D Ready?

The Dentsply Sirona Orthophos XG 3D Ready reaches 8 cm, single-arch range suited to localized implant work.

Dentsply Sironadiscontinued

Dentsply Sirona Orthophos XG 3D Ready
CBCT capability & upgrade report

Name: Dentsply Sirona Orthophos XG 3D Ready
Brand: Dentsply Sirona

Orthophos XG · released 2011 · 15 yrs in service · discontinued

✓ Works with Alvea. Your Dentsply Sirona Orthophos XG 3D Ready produces the DICOM volume Alvea works from — its scans convert to a chairside 3D model with no new hardware. It runs off the cone-beam you already take; nothing to install on the machine.

Specifications

Sharpest resolution	100 µm voxel
Field of view	5–8 cm
Capture modes	2D as sold; upgradeable to 5x5x5 up to 8x8 with 3D sensor
Detector	2D pan/ceph as shipped; 3D flat-panel added on upgrade
Tube voltage	85 kVp
Pan / Ceph	Integrated 2D + 3D
Released	2011
In service	15 years
Status	Discontinued
Export path	DICOM via SIDEXIS
Current successor	Orthophos S 3D / SL 3D
Market position	Entry path: 2D now, add CBCT later

Where the Dentsply Sirona Orthophos XG 3D Ready stands today

Resolution holds up: at its sharpest (100µm voxel) it's still in the fine-detail tier the newest units sell on. You are not behind on image quality.
Field of view tops out at 8cm — single-arch range. Good for localized implant work; whole-jaw cases need the larger-FOV path (below).
It's 15 years old (2011) — legacy hardware. The question isn't "is it old," it's "does a networking/software path get you current for a fraction of a new unit." Usually yes.
Detector: 2D pan/ceph as shipped; 3D flat-panel added on upgrade.
This model is no longer sold new (succeeded by the Orthophos S 3D / SL 3D) — which means parts, service, and software support are the thing to verify before any new spend.

What it already does that most practices don't use

The same unit does panoramic/ceph as well as 3D — one capture surface you may be sending out for.
Output/networking: DICOM via SIDEXIS. That export path is what lets a scan leave the machine and become something a patient can actually look at.

Upgrade paths for the Dentsply Sirona Orthophos XG 3D Ready

Upgrade2D unit FIELD-UPGRADEABLE to full 3D via 3D sensor install
SuccessorThe Orthophos S 3D / SL 3D is the current successor — useful as a yardstick for what actually changed, not an automatic reason to buy it.
NetworkThe fastest upgrade is almost never new hardware — it's getting the volume off the machine and into a workflow. That alone changes what the box is worth to you.
ReconfigureSwitching your default to the right FOV/scan mode for implant cases is free, and most practices never do it.

Repair vs. replace: what it costs

Repair: the dominant wear item on any dental CBCT is the X-ray tube — a replacement runs roughly $15,000-$40,000, typically every 3–7 years depending on scan volume. Budget a service contract at about $5,000–$15,000/year and software licensing around $2,000/year. A flat-panel detector is the big unknown — it isn't publicly priced, so get a manufacturer quote before assuming the worst.

Parts & service (legacy unit): because this model is no longer sold new, parts and service availability — not the sticker — decide whether a repair is worth it. Confirm both before any spend.

Replace: a comparable unit runs roughly ~$20k-35k used 2D (unverified). The honest test before spending that is whether a networking or software path gets you most of the capability for a fraction of it — for an aging machine, it usually does.

Figures are 2025–26 industry ranges for dental CBCT, not a quote for your exact unit or contract. Sources: Medical Imaging Specialists, DentalTI buyer's guide, The Dental Signal.

Dentsply Sirona Orthophos XG 3D Ready — common questions

Can Alvea use scans from the Dentsply Sirona Orthophos XG 3D Ready?: Yes. The Dentsply Sirona Orthophos XG 3D Ready exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.
Is the Dentsply Sirona Orthophos XG 3D Ready discontinued, and what replaced it?: The Dentsply Sirona Orthophos XG 3D Ready is no longer sold new; its successor is the Orthophos S 3D / SL 3D. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.
How much does a Dentsply Sirona Orthophos XG 3D Ready cost?: A comparable Dentsply Sirona Orthophos XG 3D Ready runs roughly ~$20k-35k used 2D (unverified). Before replacing, weigh whether a networking or software path gets you most of the capability for a fraction of that.
How much does it cost to repair a Dentsply Sirona Orthophos XG 3D Ready?: The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.
What is the field of view on the Dentsply Sirona Orthophos XG 3D Ready?: The Dentsply Sirona Orthophos XG 3D Ready reaches 8 cm, single-arch range suited to localized implant work.

Your cone-beam, chairside

See what a Dentsply Sirona Orthophos XG 3D Ready scan becomes.

Run the free, independent report on your exact unit — then turn one of your own scans into a 3D model the patient can see before they decide. No new hardware, no new scan.

Check my Dentsply Sirona unit → Try it on one of my scans — first one's free

Independent by design. Alvea makes nothing you'd buy from a CBCT vendor — so this report has no reason to push you toward a sale. It reads your machine, not your patients. This is an equipment capability report, not clinical guidance.