Can Alvea use scans from the Dentsply Sirona GALILEOS Compact?

Yes. The Dentsply Sirona GALILEOS Compact exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.

Is the Dentsply Sirona GALILEOS Compact discontinued, and what replaced it?

The Dentsply Sirona GALILEOS Compact is no longer sold new; its successor is the GALILEOS Comfort / Comfort Plus. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.

How much does a Dentsply Sirona GALILEOS Compact cost?

A comparable Dentsply Sirona GALILEOS Compact runs roughly ~$15k-30k used (unverified). Before replacing, weigh whether a networking or software path gets you most of the capability for a fraction of that.

How much does it cost to repair a Dentsply Sirona GALILEOS Compact?

The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.

What is the field of view on the Dentsply Sirona GALILEOS Compact?

The Dentsply Sirona GALILEOS Compact reaches 15 cm, enough to capture both arches in one scan — a mode most practices never switch to.

Dentsply Sironalegacy

Dentsply Sirona GALILEOS Compact
CBCT capability & upgrade report

Name: Dentsply Sirona GALILEOS Compact
Brand: Dentsply Sirona

GALILEOS (entry / compact 3D) · released 2009 · 17 yrs in service · legacy

✓ Works with Alvea. Your Dentsply Sirona GALILEOS Compact produces the DICOM volume Alvea works from — its scans convert to a chairside 3D model with no new hardware. It runs off the cone-beam you already take; nothing to install on the machine.

Specifications

Sharpest resolution	300 µm voxel
Field of view	8–15 cm
Capture modes	8x8, ~12x15x15 / 15x15x15 (older tables)
Detector	image intensifier based
Tube voltage	85 kVp
Scan time	~14 s
Released	2009
In service	17 years
Status	Legacy
Export path	DICOM via GALAXIS + SIDEXIS
Current successor	GALILEOS Comfort / Comfort Plus
Market position	Entry-level large-FOV dedicated 3D

Where the Dentsply Sirona GALILEOS Compact stands today

Resolution is the dated part (300µm at best). It still produces a usable volume, but this is the spec a salesman will push you on.
Field of view reaches 15cm — enough for both arches in one capture. Most practices never switch out of the small default FOV and never know they have this.
It's 17 years old (2009) — legacy hardware. The question isn't "is it old," it's "does a networking/software path get you current for a fraction of a new unit." Usually yes.
Detector: image intensifier based.
This model is no longer sold new (succeeded by the GALILEOS Comfort / Comfort Plus) — which means parts, service, and software support are the thing to verify before any new spend.

What it already does that most practices don't use

Multiple FOV modes (8x8, ~12x15x15 / 15x15x15 (older tables)). Most operators leave it on one preset — the larger modes are already paid for.
Output/networking: DICOM via GALAXIS + SIDEXIS. That export path is what lets a scan leave the machine and become something a patient can actually look at.

Upgrade paths for the Dentsply Sirona GALILEOS Compact

UpgradeLower-cost / compact Galileos variant
SuccessorThe GALILEOS Comfort / Comfort Plus is the current successor — useful as a yardstick for what actually changed, not an automatic reason to buy it.
NetworkThe fastest upgrade is almost never new hardware — it's getting the volume off the machine and into a workflow. That alone changes what the box is worth to you.
ReconfigureSwitching your default to the right FOV/scan mode for implant cases is free, and most practices never do it.

Repair vs. replace: what it costs

Repair: the dominant wear item on any dental CBCT is the X-ray tube — a replacement runs roughly $15,000-$40,000, typically every 3–7 years depending on scan volume. A larger-FOV unit like this one sits toward the upper end of that range. Budget a service contract at about $5,000–$15,000/year and software licensing around $2,000/year. A flat-panel detector is the big unknown — it isn't publicly priced, so get a manufacturer quote before assuming the worst.

Parts & service (legacy unit): because this model is no longer sold new, parts and service availability — not the sticker — decide whether a repair is worth it. Confirm both before any spend.

Replace: a comparable unit runs roughly ~$15k-30k used (unverified). The honest test before spending that is whether a networking or software path gets you most of the capability for a fraction of it — for an aging machine, it usually does.

Figures are 2025–26 industry ranges for dental CBCT, not a quote for your exact unit or contract. Sources: Medical Imaging Specialists, DentalTI buyer's guide, The Dental Signal.

Dentsply Sirona GALILEOS Compact — common questions

Can Alvea use scans from the Dentsply Sirona GALILEOS Compact?: Yes. The Dentsply Sirona GALILEOS Compact exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.
Is the Dentsply Sirona GALILEOS Compact discontinued, and what replaced it?: The Dentsply Sirona GALILEOS Compact is no longer sold new; its successor is the GALILEOS Comfort / Comfort Plus. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.
How much does a Dentsply Sirona GALILEOS Compact cost?: A comparable Dentsply Sirona GALILEOS Compact runs roughly ~$15k-30k used (unverified). Before replacing, weigh whether a networking or software path gets you most of the capability for a fraction of that.
How much does it cost to repair a Dentsply Sirona GALILEOS Compact?: The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.
What is the field of view on the Dentsply Sirona GALILEOS Compact?: The Dentsply Sirona GALILEOS Compact reaches 15 cm, enough to capture both arches in one scan — a mode most practices never switch to.

Your cone-beam, chairside

See what a Dentsply Sirona GALILEOS Compact scan becomes.

Run the free, independent report on your exact unit — then turn one of your own scans into a 3D model the patient can see before they decide. No new hardware, no new scan.

Check my Dentsply Sirona unit → Try it on one of my scans — first one's free

Independent by design. Alvea makes nothing you'd buy from a CBCT vendor — so this report has no reason to push you toward a sale. It reads your machine, not your patients. This is an equipment capability report, not clinical guidance.