Asahi Roentgen Alphard VEGA
CBCT capability & upgrade report
Specifications
| Field of view | 5.1–20 cm |
|---|---|
| Capture modes | D mode 51x51mm (dental), I mode 102x51mm (implant), larger P/C modes up to ~200x179mm |
| Detector | image intensifier (early-generation) |
| Released | 2007 |
| In service | 19 years |
| Status | Legacy |
| Export path | Standard DICOM |
| Market position | Legacy Japanese multi-FOV maxillofacial CBCT (distributed by Yoshida) |
Where the Asahi Roentgen Alphard VEGA stands today
- Field of view reaches 20cm — enough for both arches in one capture. Most practices never switch out of the small default FOV and never know they have this.
- It's 19 years old (2007) — legacy hardware. The question isn't "is it old," it's "does a networking/software path get you current for a fraction of a new unit." Usually yes.
- Detector: image intensifier (early-generation).
- This model is no longer sold new — which means parts, service, and software support are the thing to verify before any new spend.
What it already does that most practices don't use
- Multiple FOV modes (D mode 51x51mm (dental), I mode 102x51mm (implant), larger P/C modes up to ~200x179mm). Most operators leave it on one preset — the larger modes are already paid for.
- Output/networking: standard DICOM export. That export path is what lets a scan leave the machine and become something a patient can actually look at.
Upgrade paths for the Asahi Roentgen Alphard VEGA
- UpgradeMulti-mode FOV CBCT: D (dental 51mm dia x 51mm), I (implant 102mm), plus larger panoramic/cranial modes. FDA cleared via K072574.
- NetworkThe fastest upgrade is almost never new hardware — it's getting the volume off the machine and into a workflow. That alone changes what the box is worth to you.
- ReconfigureSwitching your default to the right FOV/scan mode for implant cases is free, and most practices never do it.
Repair vs. replace: what it costs
Repair: the dominant wear item on any dental CBCT is the X-ray tube — a replacement runs roughly $15,000-$40,000, typically every 3–7 years depending on scan volume. A larger-FOV unit like this one sits toward the upper end of that range. Budget a service contract at about $5,000–$15,000/year and software licensing around $2,000/year. A flat-panel detector is the big unknown — it isn't publicly priced, so get a manufacturer quote before assuming the worst.
Parts & service (legacy unit): because this model is no longer sold new, parts and service availability — not the sticker — decide whether a repair is worth it. Confirm both before any spend.
Replace: replacement pricing varies by configuration and condition. Before any trade-up, the honest test is whether a networking or software path gets you most of the capability for a fraction of a new unit.
Figures are 2025–26 industry ranges for dental CBCT, not a quote for your exact unit or contract. Sources: Medical Imaging Specialists, DentalTI buyer's guide, The Dental Signal.
Asahi Roentgen Alphard VEGA — common questions
- Can Alvea use scans from the Asahi Roentgen Alphard VEGA?
- Yes. The Asahi Roentgen Alphard VEGA exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.
- Is the Asahi Roentgen Alphard VEGA discontinued, and what replaced it?
- The Asahi Roentgen Alphard VEGA is no longer sold new. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.
- How much does it cost to repair a Asahi Roentgen Alphard VEGA?
- The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.
- What is the field of view on the Asahi Roentgen Alphard VEGA?
- The Asahi Roentgen Alphard VEGA reaches 20 cm, enough to capture both arches in one scan — a mode most practices never switch to.
See what a Asahi Roentgen Alphard VEGA scan becomes.
Run the free, independent report on your exact unit — then turn one of your own scans into a 3D model the patient can see before they decide. No new hardware, no new scan.
Check my Asahi Roentgen unit → Try it on one of my scans — first one's free