Can Alvea use scans from the Vatech PaX-Reve3D?

Yes. The Vatech PaX-Reve3D exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.

Is the Vatech PaX-Reve3D discontinued, and what replaced it?

The Vatech PaX-Reve3D is no longer sold new. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.

How much does it cost to repair a Vatech PaX-Reve3D?

The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.

What is the field of view on the Vatech PaX-Reve3D?

The Vatech PaX-Reve3D reaches 15 cm, enough to capture both arches in one scan — a mode most practices never switch to.

Vatechlegacy

Vatech PaX-Reve3D
CBCT capability & upgrade report

Name: Vatech PaX-Reve3D
Brand: Vatech

PaX-Reve · released 2010 · 16 yrs in service · legacy

✓ Works with Alvea. Your Vatech PaX-Reve3D produces the DICOM volume Alvea works from — its scans convert to a chairside 3D model with no new hardware. It runs off the cone-beam you already take; nothing to install on the machine.

Specifications

Sharpest resolution	80 µm voxel
Field of view	5–15 cm
Capture modes	5x5, 8x6, 12x8, 15x15, 15x19 (optional double-scan)
Pan / Ceph	Integrated 2D + 3D
Released	2010
In service	16 years
Status	Legacy
Export path	Standard DICOM
Market position	Legacy large-FOV system (superseded by Green family)

Where the Vatech PaX-Reve3D stands today

Resolution holds up: at its sharpest (80µm voxel) it's still in the fine-detail tier the newest units sell on. You are not behind on image quality.
Field of view reaches 15cm — enough for both arches in one capture. Most practices never switch out of the small default FOV and never know they have this.
It's 16 years old (2010) — legacy hardware. The question isn't "is it old," it's "does a networking/software path get you current for a fraction of a new unit." Usually yes.
This model is no longer sold new — which means parts, service, and software support are the thing to verify before any new spend.

What it already does that most practices don't use

Multiple FOV modes (5x5, 8x6, 12x8, 15x15, 15x19 (optional double-scan)). Most operators leave it on one preset — the larger modes are already paid for.
The same unit does panoramic/ceph as well as 3D — one capture surface you may be sending out for.
Output/networking: standard DICOM export. That export path is what lets a scan leave the machine and become something a patient can actually look at.

Upgrade paths for the Vatech PaX-Reve3D

UpgradeLegacy large-FOV CBCT/pano combo.
NetworkThe fastest upgrade is almost never new hardware — it's getting the volume off the machine and into a workflow. That alone changes what the box is worth to you.
ReconfigureSwitching your default to the right FOV/scan mode for implant cases is free, and most practices never do it.

Repair vs. replace: what it costs

Repair: the dominant wear item on any dental CBCT is the X-ray tube — a replacement runs roughly $15,000-$40,000, typically every 3–7 years depending on scan volume. A larger-FOV unit like this one sits toward the upper end of that range. Budget a service contract at about $5,000–$15,000/year and software licensing around $2,000/year. A flat-panel detector is the big unknown — it isn't publicly priced, so get a manufacturer quote before assuming the worst.

Parts & service (legacy unit): because this model is no longer sold new, parts and service availability — not the sticker — decide whether a repair is worth it. Confirm both before any spend.

Replace: replacement pricing varies by configuration and condition. Before any trade-up, the honest test is whether a networking or software path gets you most of the capability for a fraction of a new unit.

Figures are 2025–26 industry ranges for dental CBCT, not a quote for your exact unit or contract. Sources: Medical Imaging Specialists, DentalTI buyer's guide, The Dental Signal.

Vatech PaX-Reve3D — common questions

Can Alvea use scans from the Vatech PaX-Reve3D?: Yes. The Vatech PaX-Reve3D exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.
Is the Vatech PaX-Reve3D discontinued, and what replaced it?: The Vatech PaX-Reve3D is no longer sold new. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.
How much does it cost to repair a Vatech PaX-Reve3D?: The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.
What is the field of view on the Vatech PaX-Reve3D?: The Vatech PaX-Reve3D reaches 15 cm, enough to capture both arches in one scan — a mode most practices never switch to.

Your cone-beam, chairside

See what a Vatech PaX-Reve3D scan becomes.

Run the free, independent report on your exact unit — then turn one of your own scans into a 3D model the patient can see before they decide. No new hardware, no new scan.

Check my Vatech unit → Try it on one of my scans — first one's free

Independent by design. Alvea makes nothing you'd buy from a CBCT vendor — so this report has no reason to push you toward a sale. It reads your machine, not your patients. This is an equipment capability report, not clinical guidance.