Can Alvea use scans from the FONA (DentalEZ) XPan 3D?

Yes. The FONA (DentalEZ) XPan 3D exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.

Is the FONA (DentalEZ) XPan 3D discontinued, and what replaced it?

The FONA (DentalEZ) XPan 3D is no longer sold new; its successor is the FONA XPan 3D Plus. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.

How much does it cost to repair a FONA (DentalEZ) XPan 3D?

The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.

What is the field of view on the FONA (DentalEZ) XPan 3D?

The FONA (DentalEZ) XPan 3D reaches 8.5 cm, single-arch range suited to localized implant work.

FONA (DentalEZ)discontinued

FONA (DentalEZ) XPan 3D
CBCT capability & upgrade report

Name: FONA (DentalEZ) XPan 3D
Brand: FONA (DentalEZ)

XPan 3D · released 2016 · 10 yrs in service · discontinued

✓ Works with Alvea. Your FONA (DentalEZ) XPan 3D produces the DICOM volume Alvea works from — its scans convert to a chairside 3D model with no new hardware. It runs off the cone-beam you already take; nothing to install on the machine.

Specifications

Sharpest resolution	100 µm voxel
Field of view	5–8.5 cm
Capture modes	5x5 (endo), 8.5x8.5 (full arch), TMJ L/R volumes
Tube voltage	61–85 kVp
Scan time	recon from ~10s
Pan / Ceph	Integrated 2D + 3D
Released	2016
In service	10 years
Status	Discontinued
Export path	Standard DICOM
Current successor	FONA XPan 3D Plus
Market position	Compact value combo CBCT (FONA, former Sirona value brand)

Where the FONA (DentalEZ) XPan 3D stands today

Resolution holds up: at its sharpest (100µm voxel) it's still in the fine-detail tier the newest units sell on. You are not behind on image quality.
Field of view tops out at 8.5cm — single-arch range. Good for localized implant work; whole-jaw cases need the larger-FOV path (below).
At 10 years (2016) it's aging but not obsolete. This is exactly the window resellers target for a trade-up you may not need yet.
This model is no longer sold new (succeeded by the FONA XPan 3D Plus) — which means parts, service, and software support are the thing to verify before any new spend.

What it already does that most practices don't use

Multiple FOV modes (5x5 (endo), 8.5x8.5 (full arch), TMJ L/R volumes). Most operators leave it on one preset — the larger modes are already paid for.
The same unit does panoramic/ceph as well as 3D — one capture surface you may be sending out for.
Output/networking: standard DICOM export. That export path is what lets a scan leave the machine and become something a patient can actually look at.

Upgrade paths for the FONA (DentalEZ) XPan 3D

Upgrade8.5x8.5cm full-arch volume in one exposure; 14-bit dynamic range; switch between 2D/3D. Pixel 100um / voxel 160um; focal spot 0.5.
SuccessorThe FONA XPan 3D Plus is the current successor — useful as a yardstick for what actually changed, not an automatic reason to buy it.
NetworkThe fastest upgrade is almost never new hardware — it's getting the volume off the machine and into a workflow. That alone changes what the box is worth to you.
ReconfigureSwitching your default to the right FOV/scan mode for implant cases is free, and most practices never do it.

Repair vs. replace: what it costs

Repair: the dominant wear item on any dental CBCT is the X-ray tube — a replacement runs roughly $15,000-$40,000, typically every 3–7 years depending on scan volume. Budget a service contract at about $5,000–$15,000/year and software licensing around $2,000/year. A flat-panel detector is the big unknown — it isn't publicly priced, so get a manufacturer quote before assuming the worst.

Parts & service (legacy unit): because this model is no longer sold new, parts and service availability — not the sticker — decide whether a repair is worth it. Confirm both before any spend.

Replace: replacement pricing varies by configuration and condition. Before any trade-up, the honest test is whether a networking or software path gets you most of the capability for a fraction of a new unit.

Figures are 2025–26 industry ranges for dental CBCT, not a quote for your exact unit or contract. Sources: Medical Imaging Specialists, DentalTI buyer's guide, The Dental Signal.

FONA (DentalEZ) XPan 3D — common questions

Can Alvea use scans from the FONA (DentalEZ) XPan 3D?: Yes. The FONA (DentalEZ) XPan 3D exports a standard DICOM volume, and Alvea converts that volume into a chairside 3D model of the patient's jaw — no new hardware and no new scan. It runs off the cone-beam you already take.
Is the FONA (DentalEZ) XPan 3D discontinued, and what replaced it?: The FONA (DentalEZ) XPan 3D is no longer sold new; its successor is the FONA XPan 3D Plus. An aging unit is rarely a reason to replace on its own — parts, service and a software/networking path usually keep it clinically current for far less than a new machine.
How much does it cost to repair a FONA (DentalEZ) XPan 3D?: The dominant repair on any dental CBCT is the X-ray tube, which runs roughly $15,000-$40,000 and is typically replaced every 3–7 years by scan volume. Annual service contracts run about $5,000–$15,000, and a flat-panel detector is quoted by the manufacturer rather than listed publicly. These are 2025–26 industry ranges, not a quote for a specific unit.
What is the field of view on the FONA (DentalEZ) XPan 3D?: The FONA (DentalEZ) XPan 3D reaches 8.5 cm, single-arch range suited to localized implant work.

Your cone-beam, chairside

See what a FONA (DentalEZ) XPan 3D scan becomes.

Run the free, independent report on your exact unit — then turn one of your own scans into a 3D model the patient can see before they decide. No new hardware, no new scan.

Check my FONA (DentalEZ) unit → Try it on one of my scans — first one's free

Independent by design. Alvea makes nothing you'd buy from a CBCT vendor — so this report has no reason to push you toward a sale. It reads your machine, not your patients. This is an equipment capability report, not clinical guidance.